Explore our insights, trends, and updates.
Quick answer: Labour for house construction in Delhi NCR costs about ₹750–₹950 per sq ft for basic construction, ₹1,000–₹1,400 for mid-range and ₹1,600–₹5,000 for premium
Quick answer: GP2 cement is a general purpose non-shrink grout made of Portland cement, graded fillers and chemical additives. It flows freely, gains strength early
Quick answer: In 2026, building a swimming pool in India costs roughly ₹1,200 to ₹4,500 per square foot of water surface, depending on the pool
Quick answer: Fine aggregates are the small particles in concrete and mortar, such as river sand, crushed-rock sand and recycled fines, smaller than 4.75 mm.
Quick answer: To choose a residential construction company in Noida, define your home type, size, design and budget, then shortlist through referrals, reviews and visits
Quick answer: An RCC slab for a house in India typically costs ₹180 to ₹250 per sq ft all-inclusive, covering cement, sand, aggregate, steel, shuttering
Quick answer: Building a commercial building in India costs about ₹1,200–₹1,800 per sq ft for a basic warehouse or shed, ₹2,000–₹2,800 for a standard office
Quick answer: A rafter is a sloping member that runs from the ridge to the eaves and carries the main roof load down to the
Quick answer: The standard mortar ratio for brickwork is 1:4, which is 1 part cement to 4 parts sand. Use a stronger 1:3 to 1:4
Quick answer: A standard 1000 sq ft RCC house typically requires around 3 tonnes of steel, 400 bags of cement, 1,800 cu ft of sand,
Quick answer: Residential construction in India costs about ₹1,810 to ₹3,000 per sq ft for a standard house. For a 1000 sq ft house that
Quick answer: Building a house in Dehradun costs about ₹1,700 per sq ft on average, so a 1,000 sq ft house comes to roughly ₹17,00,000
Quick answer: Density is mass divided by volume, measured in kg/m³. Concrete is about 2400 kg/m³, common red brick 1900 kg/m³ and steel 7700 kg/m³,
Quick answer: Maximum built-up area = plot area × FAR (also called FSI). The largest footprint you can build on the ground = plot area
Quick answer: To build a home on a plot in Wave City, Ghaziabad, check the plot’s title and dimensions, find out what the development authority
Quick answer: Asphalt shingles are roofing tiles made from fibreglass mats coated in asphalt and topped with ceramic granules that block UV rays. They are
Quick answer: Leakage is water escaping through a definite opening, such as a burst pipe, a failed joint or a crack in the roof. It
Quick answer: DPC stands for damp proof course. It is a continuous layer of waterproof material, such as bitumen sheet, polyethylene sheet or dense concrete
Quick answer: A footing is the widened base of a foundation that spreads a building’s load safely onto the soil. Footings fall into two groups:
Quick answer: RCC stands for Reinforced Cement Concrete. It is concrete with steel bars cast inside it. Concrete is strong when it is squeezed but
Quick answer: The large builders named in this list, such as DLF, Godrej Properties, Lodha Group and Prestige Group, mostly develop apartments and commercial projects
Quick answer: Choose roofing sheets by climate, roof slope, lifespan, the weight your structure can carry, and budget. Metal sheets suit most homes: they are
Quick answer: A nominal 1:2:4 concrete mix needs about 6.34 bags of cement (50 kg each) per cubic metre, using a dry-volume factor of 1.54.
Quick answer: Beading is a narrow strip of wood, metal or PVC fixed along the edges of walls, door and window frames, tiles and corners.
Quick answer: Use 53 grade cement for beams, columns and other RCC work, and 43 grade for brick masonry, plastering and flooring. PPC costs less
Quick answer: You need approximately 10 bricks per square foot of a 9-inch thick wall, using the standard Indian modular brick (190 × 90 ×
Quick answer: Coarse sand has grains of 0.5mm to 2mm, a rough texture and good drainage, so it is used in concrete mixes, drainage layers
Quick answer: M sand (manufactured sand) is made by crushing hard granite and is used for concrete and masonry work. P sand (plaster sand) is
Quick answer: Sand is a granular material of rock and mineral particles, usually 0.0625 mm to 2 mm in size. In construction it is used
Quick answer: A concrete lintel beam is a horizontal beam placed over a door, window or other opening in a wall. It carries the weight
Quick answer: Reinforcement in construction means adding steel bars, wire mesh or fibres to concrete to make up for its low tensile strength. Concrete resists
Quick answer: A single floor house has all its rooms on one level, with no staircase. It suits families with young children, seniors or anyone
Quick answer: FAR (floor area ratio) is the total floor area of a building, counting every floor, divided by the plot area. It sets the
Quick answer: An isolated footing is a pad foundation that supports a single column, usually square or rectangular. It is the most common shallow foundation
Quick answer: Wall putty is a cement-based filler applied over plaster before painting. It fills small cracks and pores and gives a smooth base, so
Quick answer: Cement concrete flooring is a floor made of cement, sand and aggregate laid over a prepared sub-base. It is built in stages: level
Quick answer: Honeycombing is a defect where hardened concrete has voids and rough, stone-like pockets because the mix did not fill the formwork or was
Quick answer: A steel bar is a general carbon-iron alloy rod used in many industries. Rebar is a steel bar made for concrete, with a
Quick answer: A boundary wall for a house in India is usually a 5–6 ft high brick, RCC, precast concrete or stone wall on a
Walls and Dreams
