Quick answer: Maximum built-up area = plot area × FAR (also called FSI). The largest footprint you can build on the ground = plot area × permitted ground coverage. For example, on a 1,800 sq ft plot with an FAR of 2.0 and 60% ground coverage, you can build up to 3,600 sq ft in total, with no more than 1,080 sq ft on any one floor. FAR and coverage are set by your local authority, so use your plot’s actual figures.
How much you can build on a plot is not a design choice. It is fixed by two numbers in your local building byelaws, and every floor plan has to fit inside them. This guide shows how to work it out, with examples.
Plot area, built-up area and carpet area
| Term | What it measures | Includes |
|---|---|---|
| Plot area | The land you own | Everything inside the boundary, including setbacks |
| Built-up area | The covered area of the building, added up across all floors | Rooms, internal and external walls, covered balconies and staircases |
| Carpet area | The floor you can actually use | Rooms and internal partition walls; not external walls, balconies or open terraces |
Walls typically take up 10–15% of the built-up area, which is why the carpet area is always smaller. To go from one to the other, use our carpet area calculator.
The two formulas you need
- Maximum built-up area = plot area × FAR. FAR (Floor Area Ratio) and FSI (Floor Space Index) are the same thing. An FAR of 1.5 means the total floor area across all floors can be 1.5 times the plot area. See what FAR means in construction for the detail.
- Maximum ground footprint = plot area × ground coverage %. Ground coverage caps how much of the plot the building can sit on. The rest stays open as setbacks.
Divide the first result by the second and you get the number of floors needed to use the full FAR.
Worked examples
The FAR and coverage values below are examples to show the method. Yours will be in your authority’s byelaws or your allotment letter.
Example 1: 1,000 sq ft plot, FAR 1.5, coverage 60%
- Maximum built-up area = 1,000 × 1.5 = 1,500 sq ft
- Maximum footprint = 1,000 × 60% = 600 sq ft
- Floors needed = 1,500 ÷ 600 = 2.5, so a ground and first floor of 600 sq ft each and a 300 sq ft second floor
Example 2: 200 sq yd (1,800 sq ft) plot, FAR 2.0, coverage 65%
- Maximum built-up area = 1,800 × 2.0 = 3,600 sq ft
- Maximum footprint = 1,800 × 65% = 1,170 sq ft
- Floors needed = 3,600 ÷ 1,170 ≈ 3.1, so three full floors use almost all of the FAR
Example 3: working backwards from the house you want
You want 2,400 sq ft of built-up area and the FAR in your area is 1.8.
- Minimum plot area = 2,400 ÷ 1.8 = 1,333 sq ft (about 148 sq yd)
What can stop you using the full FAR
FAR is the ceiling, not a guarantee. On many plots something else bites first:
- Setbacks: the open strips required at the front, sides and rear can leave a footprint smaller than the coverage limit allows.
- Height and floor limits: a cap on building height or number of floors can stop you before the FAR is used up. See how many floors are allowed in Noida with stilt parking for one authority’s rules.
- Parking: required car spaces take up ground area. A stilt floor is the usual answer on small plots.
Byelaws also differ on what counts towards FAR. Stilt parking, basements used for parking or services, lift machine rooms and open terraces are often excluded, but check your own authority’s list rather than assuming.
Common mistakes
- Mixing up units: plots are sold in square yards or square metres and plans are drawn in square feet. 1 sq yd = 9 sq ft; 1 sq m = 10.76 sq ft.
- Treating carpet area as built-up area: the FAR calculation uses built-up area, walls included.
- Using a neighbour’s FAR: FAR changes with plot size, road width and land use, even within one sector.
- Forgetting purchasable FAR: some authorities allow extra FAR for a fee. Ask before you finalise the design.
Planning what fits on your plot
At Walls and Dreams our architects work out the permissible built-up area, coverage, setbacks and floor count for your plot before any design starts, so the plan you approve is one that will be sanctioned. Talk to our team with your plot size and location, or use the cost estimator once you know the built-up area.
FAQs
How do I calculate built-up area from plot area?
Multiply the plot area by the FAR (FSI) allowed for your plot. A 1,000 sq ft plot with an FAR of 1.5 allows 1,500 sq ft of built-up area in total across all floors.
What is the difference between built-up area and carpet area?
Carpet area is the usable floor inside the rooms. Built-up area adds the thickness of the walls, covered balconies and staircases. Walls alone typically account for 10–15% of the built-up area.
Are FAR and FSI the same?
Yes. Floor Area Ratio and Floor Space Index both mean total built-up area divided by plot area. Some authorities write it as a ratio (1.5) and others as a percentage (150).
What is ground coverage?
Ground coverage is the share of the plot the building’s footprint may occupy. At 60% coverage, a 1,000 sq ft plot can have a ground-floor footprint of up to 600 sq ft.
Is the terrace included in built-up area?
An open-to-sky terrace is generally not counted as built-up area or towards FAR. A covered or enclosed terrace usually is. Check how your local byelaws define it.