Quick answer: Pillars, or columns, are the vertical members that carry the weight of beams, slabs and walls down to the foundation. In houses they are usually square or rectangular RCC columns, built in steps: soil testing and footing, reinforcement with stirrups, formwork, concrete pouring and curing, then finishing. Local building codes and an engineer’s design decide the details.
People usually design their dream house or they’re redoing their house. In order to have good vertical support, load distribution and structural stability, you have to understand pillars (or columns). They also improve the aesthetics of your home.
This guide looks at various types of Residential Building Pillars and the construction and design of such pillars so that you have a knowledge base to make educated decisions in your residential building project.
What are Pillars/Columns?
The major vertical elements of a structure that support a building by transferring all loads of structure onto a foundation are termed pillars or columns. Depending upon the building’s needs they are made from things like concrete, steel, and bricks, etc.
Types of Pillars
Pillars are classified based on their shapes:
Square or Rectangular Columns
They are easily worked and are commonly used in building construction. Also, they are a stable, affordable option and prevent the concrete from collapsing during pouring.
Circular Columns
Circular pipes are often preferred for piling and for smooth and uninterrupted lines of sit out areas and auditoriums. In other words, they are attractive and come with structural benefits.
L-Shape Columns
These columns are mainly used on boundary walls’ corners. Square or rectangular columns provide the same structural benefits that they offer.
T-Shape Columns
T-shape pillars are most commonly used for bridge building or more design purpose projects, but the pillars are basically similar to most column types with solid structural benefits.
How a column fits into the frame
A column never works alone. Slab loads go into the beams, the beams pass them to the columns, and the columns carry them down to the footings and then to the soil. If any link is weak, the load finds another path and cracks appear. That is why the column positions are fixed on the structural drawing before the walls are planned. Our guide to column grid planning explains how the architect and structural engineer agree on them.
Pillar, column and post mean much the same thing on a building site. In a framed house, the load-bearing member is the RCC column. A decorative pillar, such as the entrance pillars on a gate or portico, may carry little or no load and is often built around a column or over brickwork.
Pillar Construction for House: Steps

Site Preparation
Beginnings of the construction start with testing of soil and excavation to guarantee that the foundation of pillars is safe and can support the construction.
Column Reinforcement Work
Maintaining strength takes reinforcement. This includes verifying the amount and frequency with which vertical bars should be included and proper lapping and spacing of stirrups.
Column Formwork
The column shape is assured by formwork while pouring concrete. It therefore has to be strong enough to keep up with the pressure of the fresh concrete.
Concrete Pouring and Curing
The formwork is filled with concrete and is poured. Curing additional weeks is necessary to achieve proper strength and durability.
Finishing Touches
After it heals, the formwork is removed, and then plastering or decorative cladding may be applied and finished work completed.
Ensuring Structural Integrity

It is essential to follow local building codes and standards to ensure safety and legal compliance. Professional engineers and architects are consulted to ensure that the materials and dimensions used meet safety standards. Also, routine check and maintenance is important to avoid damage or deterioration.
Common mistakes in column construction
- Bars out of position: vertical bars that lean or sit against the formwork lose their concrete cover and rust early. Cover blocks keep them in place.
- Joints in the wrong place: bars are lapped to get the full length. Laps should be staggered and kept away from the beam junction, as the structural drawing shows.
- Stirrups too wide apart: stirrups hold the vertical bars and stop them from buckling. Spacing is set by the engineer and is usually closer near the beam joints.
- Weak formwork: fresh concrete pushes hard on the sides. Bulging shuttering gives a column that is out of plumb.
- Poor compaction: concrete poured in one rush without vibration traps air and leaves honeycombing. See our post on honeycomb in concrete.
- Skipping curing: a column that dries out early does not reach its strength. Keep it wet and covered after the formwork comes off.
- Changing size on site: making a column smaller to gain room, or moving it to suit a door, changes how the building carries load. Any change needs the engineer’s approval.
What to ask your engineer before columns are cast
- Does the column layout match the architectural plan, and is every column on the structural drawing?
- Which concrete grade and steel are specified, and will site mixing or ready-mix concrete be used?
- Who checks the reinforcement before the concrete is poured? Bars should be inspected against the drawing every time.
- How long will the formwork stay on, and how will the columns be cured?
Design Considerations
Not only are they important for structural support, but they create an important aesthetic part of the house itself. Decorative cladding, carving, or textured finishes can spruce up your pillars, whether it’s a classic, traditional look or sleek, modern and minimalistic.
Conclusion
A well built pillar can assure your home will stand the test of time and storms. By learning how to identify the various types of pillars as well as following the step by step guide associated with the construction process, you can achieve your own architectural and structural ends. To get expert verdict, ask a civil engineer or a construction company like Walls and Dreams.
Columns sit on footings, so read about the types of footings and how the RCC frame works. The beams they support are covered in types of beams and plinth beam. For the full sequence, see the house construction process step by step. If you are planning a house, see our construction company page.
Frequently asked questions
What is the difference between a pillar and a column?
On a building site the words are used for the same thing: a vertical member that carries load to the foundation. A decorative pillar may carry little or no load, while a structural column is designed by an engineer.
Which pillar shapes are used in house construction?
Square or rectangular columns are the most common because they are easy to shutter, stable and affordable. Circular columns suit open areas and smooth lines. L-shaped columns are used at corners such as boundary walls, and T-shaped ones mostly in bridges and special designs.
What are the steps to build a column?
Test the soil and prepare the foundation, fix the vertical bars and stirrups, set up the formwork, pour and compact the concrete, then cure it. After curing, remove the formwork and apply plaster or cladding.
Why are stirrups used in columns?
Stirrups hold the vertical bars in position and stop them from buckling under load. Their number and spacing must follow the structural drawing, so they should be checked before concrete is poured.
Can I change a column’s position or size during construction?
Not without the structural engineer. Columns are placed to carry the loads of the whole frame, so moving or shrinking one changes how the building takes load and can lead to cracks.